Original notebook power adapter burned out, the current is the original 3.95A is equipped with 4.74A, you can use it?
This is no problem, the voltage can match
Can be used because your laptop can drag the power to determine the power of the power consumption, even if you use the 4.74A power supply, but your notebook can only drag to 3.95A current work, the remaining current can be retained In the power of this, so that the life of the power supply have a better guarantee!
Can be used.
As long as the same voltage, high-power power supply can replace the use of low-power power, but does not recommend long-term use of high-power power adapter instead of low-power power adapter. It is best to use the same voltage, current adapter.
See if the adapter is suitable for the equipment, the following three conditions for reference:
1. The output voltage of the adapter is the same as that required by the device.
2. Is the adapter's output current consistent with the device requirements? (Or slightly larger, it is best not to small)
3. The size of the joint is appropriate. (If the connector is too loose, will be bad contact, excessive fever)
Do not be small on the line. The original 3.95A you that is integrated graphics it, alone significant notebook power consumption, the current is large, I was 4.74A
