PVC plastic flooring should be how to pave the road, want to shop this floor, but do not know PVC plastic floor price per square meter of stone? Tell me what the trouble!
For different horizon: 1, cement: Horizon must clean wet (if it is to be painted after the paint is dry), all cracks and holes with suitable fillers (such as gypsum). 2, wood floor: to ensure that the original floor clean, clean, no glaze, no wax, no oil, and firmly stick to the ground, the filling of all cracks and holes with the appropriate (such as gypsum). 3, PVC floor: remove all dirty oil or wax floors, must not be laid on the soft plastic or rubber floor, the floor will be removed or covered with a layer of three plywood, and the filling material is suitable for all cracks and holes (such as gypsum).
Due to the thickness of the PVC plastic floor is only about 3mm without self bearing capacity, so the ground floor of the high requirements. The technical specifications and performance of this product and the basis of the construction of this product on the ground floor, and the development of standards for the detection of regulations. , 1 humidity: floor based moisture content should be less than 5%, keep the surface dry before construction. 2, surface hardness: 3, fast cutting surface roughness without a trace file or groove surface with a sharp chisel: 2 m straightedge inspection, voids should be less than 2mm. 4 crack: the ground crack width is less than 1.5mm. 5, surface density: the surface must not be too rough, not too many pores, to clean the floor. 6, surface cleanliness: oil, wax, paint, pigment and other residual material must be removed.
Hello, this PVC plastic floor construction is very simple, but you must carefully check your current level, to ensure that the entire horizon must be clean, smooth, hard, dry, no cracks.
