How to drill manually, that is, let him press it, it will move, do not press it.Hope to step in detail, thanks in advance.
In manual picture press F7, F8.SPE20.F6 is OK, SPE20 is spindle, starting speed is 20
Excuse me: so how many Schmoll does your company have?
S40 machine, then press F3--F8---F7---F6 in x30
Germany SCHMOLL mechanical drilling machine manufacturer, for drilling factory and general PCB factory, the proposed low investment and high efficiency, high yield of AC 6-160 drilling machine is used, which is mainly granite in architecture, X, Y axis, all using 50M / min AC + screw motor, the other can be equipped with DC motor 170 thousand high torque spindle, spindle motor or 160 thousand to AC. AC 6-160 for the advantages of low investment cost, fast speed, the speed of the fastest in the same level models; in addition, SCHMOLL is currently the world's first use of DC spindle motor, because of its speed range, from 8k~170k, a wide range of applications, not only limited to a certain diameter range, regardless of the drilling the diameter (0.05mm) and large diameter (6.35mm) can be used, especially large diameter (> 4mm) can have better quality of drilling. At the same time, the machine has real-time monitoring, speed function, when the standard is below, the machine will automatically reduce the feed speed to protect the main shaft. The other uses the current touch induction type measuring needle and fast drilling function, this system has been applied to the SCHMOLL for about 10 years, its ability to measure the broken needle, can be measured in time to break the needle 0.05~6.35mm, but by rapid drilling functions significantly improve productivity, and can also be applied to mechanical hole.
