does any one know wether water pipe fitting with compression connection and the likeor nut fitting threads are in the same direction as mechanical nut and bolts i.e. turning clockwise for tightening and anticlockwise for loosening? thanks.
Take it to a professional . not a DIY project.
a million) turn off and unplug the laser printer. 2) eliminate each and each toner cartridge and use disposable paper towels to wipe up any extra toner spills accumulated close to and around the rollers. extra toner buildup interior the printer can commute and clog different printer factors with airborne dirt and dirt. this would exceptionally influence the known of your printed copies. positioned the toners back of their respective positions and close the unit. 3) Plug the printer back in. 4) sparkling the printer rollers with pretreated cleansing printing sheets. available at maximum branch grant shops, those sheets grab extra airborne dirt and dirt and dirt as they bypass in the time of the rollers. place a sheet interior the coolest printer tray and run by using as though to maintain a replica. in case you commit to no longer use cleansing sheets, wipe down each and each curler utilising disposable paper towels (with the printer unplugged). 5) sparkling the glass with the two eyeglass cleansing wipes or printer glass cleansing fluid made particularly for cleansing printing gadget glass and a comfortable cotton cloth. 6) sparkling the exterior of the printer. Take a dry, sparkling cotton cloth or disposable cloth made up of organic fibers and wipe the printer sparkling from good to backside. ok.
NEVER replace any part till you KNOW the problem. I would suggest you take a close look at your battery connections and ground and clean the battery posts and terminals while you are at it. Why do people always start replacing parts when they have not a hint of what they are doing ?
