Points for attention of vacuum oil filter
Application and notice of vacuum oil filter2.1 because the vacuum oil filter is used less (one or two years only last time), therefore, the operator should read the instruction carefully before operation, and must be familiar with the operation method of the oil filter.2.2 operate strictly according to the order of instructions and strictly control the oil level of the tank to prevent the oil from being absorbed into the vacuum pump.2.3, the oil temperature is generally controlled at 40~60 degrees (except for instructions).2.4, the use of oil filters are often checked, the oil pipe joints, valves are blocked, oil spills, such as the breakdown should immediately stop inspection, processing. Anti static earthing measures shall be adopted for the oil filter and the metal piping of the oil system.2.5 during the operation of the vacuum oil filter, when the outlet oil pressure is greater than 0.3Mpa, the reasons should be checked. When the plug is stopped, the filter components can be stopped, cleaned or replaced.2.6, operators must be strictly responsible for the work, serious and responsible, on duty, shall not do other irrelevant things.
1.4 check whether the external power supply is correct, whether the power cable meets the capacity requirements of the oil filter.1.5 check the machine housing should be reliable grounding.1.6 check that all rotating parts should be free of obstruction.1.7 test turn, check the oil pump, vacuum pump and other motor steering should meet the requirements.1.8 check whether the cooling water connection is reliable and the water should be clear.1.9 check field fire extinguishers to meet the requirements.
Inspection and inspection of vacuum oil filter1.1 check the vacuum filter oil machine electrical equipment (all kinds of meter) should be tested by units of regular inspection and testing, qualified before they can be put into use.1.2 whether the machine is stable or not, test and check, there should be no shaking or vibration.1.3, check the inlet and outlet pipe is installed correctly, the external pipe is firmly installed, hose and metal pipe joints are applied monkey hoop tight, as a way to prevent the pipeline run off measures.
1, the power supply, you must connect the ground wire to operate.2, before the operation, pay attention to the direction of motor rotation, in line with the arrow direction.3, no oil circulation, shall not turn on the heater, otherwise it will burn the heater, heavy will be fried.4 、 drain all the oil outlet valve before draining.5, the working environment temperature is lower than 30 DEG C, higher than +40 degrees centigrade, should not use.
