30 days ago, I purchased a 120hz Flat Screen TV. It was working just fine until about 4 days ago. Remote stopped working so I changed batteries, but that didn't help. So I moved TV into another room, it went back to normal. I moved another working flat screen into the master bedroom and it started acting up. This has led me to believe that this might be electrical wiring failing. Can anyone help me?ThanksAdam
the previous answer is inaccurate. What you've is a managed receptacle. there is likely no longer something incorrect that replacing it would fix. search for a swap someplace that appears like it does no longer something. Key the swap some cases even as your receptacle tester is plugged into the suitable one. you ought to be conscious it shows circuit ok then no ability as you key the swap. The black cord is your consistent, the pink your swap-leg. The white is the impartial and the fairway is your grounding conductor. If the receptacle were fed with 2 circuits, like another guy suggested, your impartial will be overloaded and would burn the homestead down. In all honesty, once you ought to ask questions like this, then you actually could no longer be messing with the electric powered wiring. electric powered wonder kills. Your favourite lights and equipment circuits have a 15amp breaker for over-contemporary protection. One 10th of one ampere throughout the time of your coronary heart is sufficient to make it stop.
your probably experiencing some kind of interference from another appliance or electrical component.
It may not be faulty wiring it can be a few things. Is your house older? If so there may be too many electric devises on that circuit. I find that alot in older homes. Try plugging something else into that outlet, like a power tool or whatever. See if it works. If it does, then you know the outlet is working as it should. It could be your cable connection. It would be helpful to know what is happening when it is acting up. Your answer may just be have an electrician check it out for you.
USA Several things come to mind 1. Lack of proper ground 2. Lack of proper neutral 3. Loose connection of either a hot, a neutral or a ground wire, or a combination of two or three 4. Damaged or worn out receptacle Please have a licensed electrician investigate and repair
