Production of sodium based bentonite
In the drying process, the heat exchange type hot blast stove is used as a drying energy source, and the high temperature purified flue gas generated by the hot blast stove is fully contacted with the sodium base bentonite in the three channel rotary drier to achieve the purpose of removing moisture. After drying the material in the cyclone in the wind from amenorrhea.
The sodium bentonite is transported into the mixing system through the conveying equipment, and the material is fully and evenly stirred, then transported to the sodium machine through the conveying system, and the sodium machine is used to make sodium bentonite. After sodium bentonite has 40% water content, it must be dried by three channels to get moisture content of 10%.
