Pump head is too high what's the impact?
Water pressure is too large, energy consumption is too high, you can choose near the flow of Yang Cheng
Measure the height of 50m, using 100m lift pump, the disadvantage is a waste of energy, such as the selection of 100m lift pump, flow of 10 cubic meters, motor power 5KW, with less than 5 0m lift pump, flow of 10 cubic meters, motor power 5KW, so that the lift ratio measurement height is greater than 10-20%, on the same pump motor power next, the pump head is larger, less water.If the height of 50m is measured, the pump with 100m lift head is used, but what is the influence of the flow rate on the pump or pipe?.
After the determination of the pump type, such as the actual pump lift is too high, it will not only result in lower efficiency of the pump, and will seriously affect the actual flow of the pump to Q decline. On the contrary, if the pump head selected too high, but the actual operation of the lift is too low, is also affecting the pump efficiency and decrease caused by actual operation when the flow is too large, it is likely to increase the pump power beyond the rated current of the motor and the heating.
