I just bought the second - hand housing in 2007, when the rain when the windowsill cracks are a lot of water, and near the windowsill wall also part of the fall off, Jiqiu: how can I do? Is it looking for waterproof or redo windows?
This is a frequent problem of construction.
Although the wooden frame is black, the problem is still in the window outside the stage. Medical treatment is the root cause, it is recommended to use 107 glue and the cement, the window frame and wall connection gap embedded in the same time, outside the stage to make it into the high outside the low slope, so the windowsill will not water, water Will not flow into the window frame inside. Good-looking and does not look good, anyway, on the outside wall. If done well, it will not be seepage again.
It is obviously the problem of the window. There is a gap between the lower part of the window and the wall, and the inner sill is as high as the outer sill, or low.
The solution is to shave off the mortar of the external window sill, re-paint, mortar and the gap between the windows, with weathering rubber marked, if the glue dry, the contraction of the more powerful, to play again, fill the gap full The
Outside the windowsill, wiping the face, take out the slope of the camouflage, so that the rain in time to drain. Be careful not to be too high, do not block the bottom of the window itself drains the drain.
The inner sill, preferably also high, at least half a centimeter higher than the outside.
The fundamental solution: the windows of the water in the groove need to take the drill hole so that the water will not be out of the water.
