Shelf height should be below fire sprinkler cm
The shelf panels above the shelf shall be enclosed laminates. If there is a hole or a gap above the sprinkler head, a hot water shield shall be arranged above the sprinkler head. Heat and water collector should be square or circular metal plate, the surface area of not less than 0.12m2, around the curved edge under the edge of the nozzle and the splash plate should be flush.
The built-in shelves and roof under sprinkler nozzle should be staggered, the splash plate and above the plate distance, should comply with the provisions of article 7.1.3 of this code, and the goods below the vertical distance from the top surface shall not be less than 150mm.
