Solid wood furniture paint brush color good or good
In addition, solid wood furniture should keep away from heat sources and avoid direct sunlight. In winter, it is better to place furniture at a distance of about 1 meters from the heating area to avoid prolonged baking, thus preventing local cracking and deformation of wood. Outdoor sunlight should be avoided as far as possible for the overall or ministerial time of the furniture, where it is best placed to avoid direct sunlight or to clear daylight with transparent gauze curtains.
Avoid using alcohol, gasoline, or other chemical solvents to remove stains. There are stains such as wood furniture surface, never hard fierce wipe, usable warm tea stains and gently remove, wait until after the evaporation of moisture in the original parts with a little Xu Guang wax, and then gently grinding times and try to form a protective film. Be careful not to let hard metal products or other weapons hit furniture, protect its surface without bruising marks. In addition, in summer, such as indoor flooding, it is appropriate to use thin rubber pad, furniture and ground contact parts separated, while allowing furniture to wall with the wall to maintain a distance of 0.5 - 1 cm distance.
Attention should be paid to the cleaning and maintenance of the furniture surface. The surface of solid wood furniture is painted with paint, which is particularly important for the maintenance and maintenance of the paint film. Once the film is damaged, not only affect the appearance, but will further affect the internal structure of the product, so it should always keep the furniture clean. Every day with cotton dry soft cloth gently wipe the furniture surface dust, every once in a while to wring dry wet cotton moisture at the furniture corner carefully wipe the dust, and then clean dry dry soft fine cotton. Usually, in the dry after also can give the furniture coated with a thin layer of high quality light like wax, rub gently wipe out shine leather. In doing so, not only the maintenance of solid wood furniture, but also increased its brightness, but the choice of light wax must be careful, must not use the chemical composition of poor products
A thin varnish should be used to make sure the color is uniform. If you want to clean it directly on the log, it's really difficult. We do high-end export furniture, and now are all used water paint.
