Stainless steel strap easy to scrape, how to deal with?
All the scratches on the watch, watch case and watch band can be removed by this method if you want to remove it or make a look at the appearance of the watch. The lines of straight lines are easier to handle. If the lines are concentric, that should be done with electrical machines.
They use sandpaper to repair scratches watchcase watchband above, is not difficult, as long as careful steady hand could do; but for the surface polishing process, it must use the polishing machine, ordinary people can not do.
Hand tools also pay attention to, recommend the use of hemostatic forceps to surgery, just take a piece of sandpaper, folded after the use of hemostatic clamp tightly, parallel to the original lines do pull sand, sapphire glass is hard, can not consider it, but watch the shell is made of stainless steel, must pay attention to the operation, can not be it is necessary to draw rub, available cover tape. The technical aspect is that all the sand grains must go up all the time, and all of them are in the center of the dial and radiate.
On the local case or watch strap deep scratches, repair before the need to do local processing, look at the location, such as the shell side case, there may even use the fine small file, more is the use of stone, then under the magnifying glass, carefully remove deep scratches and boring flat, deep scratches in the first, to focus on the local stone grind. This needs to be under a magnifying glass, the purpose is to scratch evenly polished, when basic scratches are going to grind, choose suitable size to sandpaper, grinding along the original sand drawing lines, so the lines are usually on the dial radially, and this is a carefully, to a little, the effect will be good to rub out the realistic. It is recommended that the sand paper be used in jewelry industry, preferably imported, such as German warrior brand water sandpaper.
As the process of case surface, basically of two kinds: polishing and sand, or both, grinding watch case on the scratch, but also in accordance with the original process to do a large area of hair road wear, relatively easy to handle; but if there is hard scratch deep, will be trouble some, because both polishing and sand drawing techniques, are not enough to remove the scratches.
