Stepper motor 50 torque is equivalent to the ordinary motor how many watts?
4, the stepper motor is an induction motor, its working principle is the use of electronic circuit, the DC power supply variable components, multi-phase timing control current this current stepper motor power supply, stepper motor can work normally, the power supply for the stepper motor driver is divided into the multi phase the timing controller.
5, although stepper motor has been widely used, but the stepper motor can not like ordinary DC motor, AC motor in the regular use. It must be composed of double ring pulse signal, power drive circuit and so on, and the control system can be used. It involves mechanical, electrical, electronic and computer and many other professional knowledge. Stepping motor, as an actuator, is one of the key products of mechatronics. It is widely used in various automatic control systems. With the development of micro electronics and computer technology, the requirement of stepping motor is increasing day by day, and it is applied in every national economic field.
3, stepper motor is to change the electrical pulse signal to angular displacement or linear displacement of the open-loop control element stepper motor. In the case of non overloaded, the motor speed and stop position depends only on the pulse frequency and pulse number, regardless of load changes, when the stepper driver receives a pulse signal, it drives stepper motor to set the direction of rotation of a fixed angle, called "step", it is the rotation of the fixed point of the operation step by step. Number of pulses can be controlled by controlling the angular displacement, so as to achieve the purpose of accurate positioning; at the same time by controlling the pulse frequency to control the motor rotation speed and acceleration, so as to achieve the purpose of speed.
Stepper motor torque can be equivalent to 50 general motors - how to measure.1, stepper motor is not measured by power, and all are to maintain the torque of this parameter to measure, the unit is NM.2, if you must know the stepper motor power can be applied formula, power = voltage, X current (w=vXa). Motor generally has rated current and resistance, calculated power rating, but the actual power must be measured by dynamometer.
