Stir the mortar to add any material into the mortar to use
Masonry mortar with the ratio of qualified laboratories according to the actual situation of the scene with the test to determine and meet the consistency, the level of compressive strength requirements II
, Masonry mortar () mortar raw materials required by the use of raw materials must be tested according to the current standards of qualified use (b) mortar with the ratio of compliance
Masonry mortar consistency Masonry material rough hole and water absorption than block or dry heat conditions Masonry should be used more consistency value mortar reaction selection consistency value than mortar three Masonry mortar layer in the 30mm to ensure that the mortar with good water retention Construction of cement mortar instead of cement mortar should be re-determined mortar strength level and design and consent (c) mortar with the sword and the use of dependency Mortar field mixing of the material should be used to measure the amount of two The mortar should be mechanically stirred and stirred The cement mortar cement mortar is less than 2 min The cement and fly ash mortar is mixed with the admixture mortar Less than three min; (c) blending machine plasticizer mortar should be three ~ 5min three Mortar should be mixed with cement mortar cement mortar should be used within three hours after the completion of four hours; high temperature during the construction of ultra-three 0 ℃ should not mix II h three h within the use of latex mortar mixed with the use of specific mortar strength by the side paint 0 paint the body of the body by the two bar d standard maintenance test group of six pieces of the compressive strength of the specimen to determine the mortar test piece should be random mixing device mouth, the same production of mortar should be produced Group test pieces per test batch over two 50r paint by three masonry various types and strength grade masonry mortar each mixer should be at least pumping
