Home > categories > Hydraulic & Pneumatic > Water Pump > Submersible pump reverse impact on the pump
Question:

Submersible pump reverse impact on the pump

Submersible pump reverse impact on the pump

Answer:

Small amount of water, large current, long running time, easy overheating, or even burning pump.
The pressure is too small, the current is too large, the operation time is too long will burn out the pump!
Water pump is easy to burn out.Submersible pump is an important equipment for deep well water extraction. When in use, the whole unit dives into the water. The extraction of groundwater to the surface is water, mine rescue, industrial cooling, irrigation, water lifting, ship ballast, also can be used in fountain landscape, hot water submersible pump for hot spring bath, but also can be applied to the extraction of groundwater from wells, can also be used in rivers, reservoirs, canals and other water projects. Mainly used for irrigation and high mountain areas, drinking water, but also for the central air conditioning cooling, heat pump, cooling pump unit, city, factories, mines, railways, construction site drainage use. The general flow can be achieved (5m per hour, fand fand ~650m) head can reach 10-550 meters.There are several kinds of electric submersible pump, in line package is oil immersed and water invasion there is dry must first read the instructions before use, cannot be wrong, not long before use, must have to make the impeller turn, or because of long time card dead burning.Before the pump is opened, the suction pipe and pump must be filled with liquid. Open the pump, the impeller rotating speed, which leaves the liquid together with the rotation under the action of centrifugal force, the left outside impeller injection, injection of the liquid in the pump shell gradually slow the spread of indoor speed, the pressure gradually increased, and then from the pump outlet, the outflow discharge tube.At this time, in the leaves at the center of the vacuum area of low pressure liquid was thrown to the surrounding formation there is no air and no liquid, liquid pool at the surface of the liquid under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is continuously pumped up from the liquid pool is also continuously from the outflow discharge tube.

Share to: