Home > categories > Healthcare > Surgical Instruments > Surgical equipment after the initial soaking disinfection with what the best disinfectant
Question:

Surgical equipment after the initial soaking disinfection with what the best disinfectant

Surgical equipment after the initial soaking disinfection with what the best disinfectant

Answer:

Surgical instruments, generally first with water brush clean blood, and then, carefully check the equipment, medical suture needle, medical surgical blade, are directly throw away do not wash, check the equipment if found unqualified equipment, promptly removed, qualified equipment, into the ultrasound Clean, and then wash, and then dry, the equipment room will be sharp things such as blade, suture needle, mounted in the box, and then, and other equipment, accessories, surgical towel, wrapped in a large blue cloth surgical equipment package And then hit the rope, paste the high-pressure steam disinfection instructions stickers, into the high-pressure steam disinfection pot disinfection, each disinfection pot, put sterile indicator card, 5 points to stay thermometer, inserted in the upper left, right upper left lower right lower disinfection 30 minutes, the package should not be greater than 55 by 33 by 22 CM can also boil disinfection for 2 hours, you can also use 0.1% benzalkonium bromide soak for 30 minutes, or 0.1 chlorhexidine soak for 30 minutes, you can also boil for 1 hour, after 0.2 Glutaraldehyde, soak for 10 hours, completely disinfected.
Glutaraldehyde is a highly effective disinfectant. Because of the bactericidal spectrum is wide, the bactericidal spores are reliable, the bactericidal effect is less affected by the organic matter, the metal is corrosive and so on. It is suitable for the disinfection and sterilization of the heat-resistant medical equipment and precision instruments, especially the endoscope Disinfection and sterilization. However, since glutaraldehyde is potentially toxic to the human body and is irritating to the skin and mucous membranes, some people are actively looking for alternatives to sterilization for endoscopes and other medical devices. ???????The new dilution can be used to wash hands before surgery (0.05 to 0.1%, which can be used to remove the clothes, and it is easy to be preserved. It is a kind of anti- Soak for 5 minutes), skin disinfection and fungal infection (0.1%), mucosal disinfection (0.01 ~ 0.05%), disinfection equipment (0.1% solution in boiling for 15 minutes and then soaked for 30 minutes) Or other synthetic detergent used to avoid the use of aluminum containers, disinfection of metal equipment need to add 0.5% sodium nitrite rust, should not be used for cystoscopy, ophthalmic equipment and synthetic rubber disinfection. Gram-negative bacilli and intestinal The virus is weak and has no effect on Mycobacterium tuberculosis and spores.
Surgical instruments, generally first with water brush clean blood, and then, carefully check the equipment, medical suture needle, medical surgical blade, are directly throw away do not wash, check the equipment if found unqualified equipment, promptly removed, qualified equipment, into the ultrasound Clean, and then wash, and then dry, the equipment room will be sharp things such as blade, suture needle, mounted in the box, and then, and other equipment, accessories, surgical towel, wrapped in a large blue cloth surgical equipment package And then hit the rope, paste the high-pressure steam disinfection instructions stickers, into the high-pressure steam disinfection pot disinfection, each disinfection pot, put sterile indicator card, 5 points to stay thermometer, inserted in the upper left, right upper left lower right lower disinfection 30 minutes, the package should not be greater than 55 by 33 by 22 CM can also boil disinfection for 2 hours, you can also use 0.1% benzalkonium bromide soak for 30 minutes, or 0.1 chlorhexidine soak for 30 minutes, you can also boil for 1 hour, after 0.2 Glutaraldehyde, soak for 10 hours, completely disinfected.

Share to: