TCL TV and set-top boxes how to connect, how to adjust the TV?
Hello, 1, the cable TV signal line is connected to the set-top box; 2, to the TV is connected with the AV cable, video is yellow line, red and white is the audio line; 3, turn on the TV and set-top box power supply, the TV set video through the remote control function mode of AV; 4, the adjustment of the set-top box, i.e. through the set-top box remote search TV signal, until all the search saved so far; 5, through the set-top box remote watching TV program you want to see it. If there is no audio and video input socket on the TV, you must buy a radio frequency converter for AV video and audio use.
Method of television switching signal source: 1, according to the TV remote controller "source" key; 2, the TV screen will display "1" video "Video 2" "USB" "HDMI1" "HDMI2" "VGA" "YUV" option; 3, through the up and down keys to select items, determine the key about option; 4, for example: if it is HD set-top box connected to the TV with high definition multimedia interface line, it must choose a high definition multimedia interface corresponding to the ("HDMI1" or "HDMI2"); if the set-top box SD, with audio and video lines connected to the TV, then put the TV signal source switching to the corresponding "1" or "2 video video".
Two, network set-top box 1, Internet set-top box and TV boot; 2, connect the network cable network set-top box network, to automatically obtain IP, network connection is successful; 3, with audio and video line line [audio line (red and white), video (yellow line)] relative the color should be connected with the set-top box and TV set-top box, and connect the power adapter; if the set-top box and TV are HD, also can use the high definition multimedia interface line (HDMI line) HDMI interface is connected with the TV and high-definition set-top box. 4, after the installation, the TV signal source switch to the set-top box input consistent video signal source; 5, this way, you can watch the normal network movies and tv. Three, satellite set-top box 1, when installing the set-top box, the first to signal the input signal line access satellite set-top box plate mouth; 2, with audio and video line line [audio line (red and white), video (yellow line)] color corresponding with set-top boxes and TV; if the set-top box and TV are HD, also can use the high definition multimedia interface line (HDMI line) HDMI interface is connected with the TV and high-definition set-top box. 3, the corresponding connections are correct after the need to check the signal line and the audio and video lines, whether there is loose; 4, the power installed after the turn on the TV and set-top boxes, after using the TV remote control signal source conversion to the corresponding video signal source STB input; 5, choose the corresponding satellite set parameters then, the search program, until the end of the program will be able to search after the normal watch TV show.
TCL TV and set-top box connection method is as follows:First, cable digital TV set-top boxes1, first, the cable signal line (white) is connected to the signal input port of the backboard of the set-top box;2, and then audio lines and video lines [audio] (red and white), video lines (yellow) corresponding colors connected set-top boxes and television.Attached: audio and video cable????If set-top boxes and televisions are high definition, you can also use high-definition multimedia interface line (HDMI line) to connect the TV and HD set-top box HDMI interface.Attached: high definition multimedia interface line?????3, after the corresponding line is properly connected, you need to check the signal line and audio and video cable is loose;4, after the installation, turn on the TV and set-top box power, and then use the TV remote control to convert the signal source to the set-top box input video signal source;5, wait until the automatic search after the program, you will be able to watch TV programs.
