TDH what units are present in the pump parameters?
TDH, Total, Discharge, Head, that means the head, the unit is usually feet. 1 feet =0.3048 meters.
Answer: TDH stands for single pole double suction horizontal chemical process pump, suitable for conveying clean or containing micro solid particles of ultra low temperature or high temperature liquid medium, is also particularly suitable for conveying strong corrosive medium. All facilities for horizontal installation are available.Mainly used:Petroleum smelting plant, petroleum conveying equipment and pump used in petroleum deep processing devicePump for coal chemical processPumps for water and desalination systemsPumps for fuel coal fired power generation equipmentSewage treatment and environmental protection pumpStructure characteristics:Pump in the horizontal opening, suction and discharge pipeline is located in the lower half of the pump body. The disassembly and replacement of the wearing parts and the replacement of the rotor parts can be performed without disassembly of the pipe.Double suction impeller, high efficiency, good cavitation performance, axial force is basically balanced.Rigid axle shaft and bearing, double end support, small deflection, small vibration, low noise, oil lubrication of rolling bearings with oil ring, constant level oiler automatic control level, and can get automatic compensation, radial thrust ball bearings back-to-back bear residual axial force.The sealing ring of the shell is provided with a stop and a step, and is arranged on the pump body and the pump cover, so that the assembly and disassembly are convenient.
In the pump parameters, TDH is the head of President (Ying Chi).The formula is as follows:TDH (Ying Chi) = total head (Ying Chi) = (- water pressure readings + drainage pressure gauge (drainage dynamic head - water head + (drainage pressure gauge - water pressure elevation correction table elevation correction)