Template hot press manual normal, automatic low pressure non-stop, high pressure without pressure, how to do?
Be based on positive pressure in the negative pressure, with special glue, hot press for processing the PVC series, the line in place and paste is negative pressure equipment can not be compared, because of its high pressure, low temperature, membrane pressure in short time, to solve the workpiece when the negative pressure equipment (especially the large area of the workpiece) the deformation of the workpiece deformation problem, greatly reduced. The adoption of advanced electronic new product control, through the adjustment, can enter the Taiwan, rise, heating, vacuum, film pressure, film stripping, and Taiwan's automatic completion of the processing process. Mainly to hydraulic and compressed air as a driving force, so you should have enough air pressure and the frame for the whole processing of steel plate, the overall structure is reasonable, the two stage can cycle hot press, and also can be used separately. The vacuum can be adjusted as low pressure and high pressure suction. The film pressure is up to 0.4MPa. Through adjustment, the product can achieve the desired effect.
The standard press machine consists of double column and four column, table and floor type, and manual and automatic hot press with pressure capacity ranging from 12 to 100 tons.
