The bench vice is used by the fitter to have which two kinds
vise The use and type of bench vice: A and USES: a bench vice is specialized in holding the work piece, B, specification: the size of the tongs is the width of the tongs, and the usual 100mm, 125 mm and 150 mm, etc C, type: type has a fixed and rotary type
The working principle of rotary table vice: Rotary table vice clamp body can be relative to the base of rotary (detailed in figure 1-2 a), can satisfy different azimuth processing need, easy to use, wide application.
Tips for using bench vice: (1), and clamping workpiece elastic to appropriate, can only use hand tight, but cannot use power tools strength, one is to prevent the screw and nut and clamp suffering damage, the second is to prevent bad surface. (2) in the case of strong work, the force should be fixed in the direction of the clamp, so as not to increase the load of the clamp and screw and nut, and affect its service life. (3) it is not possible to knock on the smooth surface of the active tongs to prevent damage to the fit of the clamp. (4) the surface of activities such as screw and nut should be cleaned and lubricated regularly to prevent rust
