The car tires up and put a few pressure on it.
Please inflate the tire pressure recommended by the car plant. You can find the tire pressure recommended value of the vehicle in the user manual or the cab door (near the B column), the fuel tank cover, the storage tank and so on, marked with the tire type.The recommended tire pressure is usually the tire pressure measured under the condition of cooling.A tyre cooling condition is defined as a minimum of three hours after parking or a tire running no more than 2 km. If you can only measure the tire pressure during the hot tire, please subtract the measured tire pressure value by about 0.3 bar (= 4psi), that is, the tire cooling and charging pressure.
5, do not exceed standard too much. When inflated, should not exceed the standard, and then re air, nor can not be inflated due to long-term ventilation can not be inflated, such as excessive standards will lead to excessive expansion of the cord, affecting the service life of the tires6, check whether the leak. Before inflating, the dust on the valve mouth should be cleaned. Do not loosen the valve core. After inflation, apply foam water on the valve to check whether it is leaking.
3. Check the valve. If the valve and valve core do not match properly, the phenomenon of protruding concave and other defects can not be inflated and air pressure is measured.4, inflatable should pay attention to cleaning. The filled air shall not contain water or oil to prevent deterioration or deterioration of the rubber inside the tire.
Look at models, most of the 2.5 can play, a small number of explosion-proof tires to 2.8, a small number of cars 2.2supplement1, inflatable should pay attention to safety. Always use the barometer to check the air pressure, so as not to inflate too much to cause the tyre to burst.2. Heat up first and then inflate. The vehicle stopped, to heat the tyres after inflation, because when the vehicle is running, the tire temperature, the pressure effect.
