The difference between a cone crusher and a counter blow
Thus, the crushing wall of the broken cone is sometimes close to and sometimes leaves the surface of the mortar wall fixed on the adjusting sleeve, so that the ore is continuously impacted in the crushing chamber, and the crushing and the bending action are carried out to realize the crushing of the ore. The motor drives the eccentric sleeve through the bevel gear so that the crushing cone acts as a swing pendulum. The broken cone sometimes approaches and sometimes leaves the stationary cone to complete crushing and discharging. When the support is connected with the frame body, the spring is compressed by the spring, and when the crusher falls into the metal block, etc., the spring can generate compression deformation, and the foreign substance is discharged to realize the insurance and prevent the machine from being damaged.
When the cone crusher works, the motor rotates through a belt pulley or a coupling, a cone crusher, a transmission shaft and a cone crusher, and the conical part rotates around the fixed point of the eccentric sleeve for a swing motion.
The impact crusher is a crushing machine which uses shock energy to crush materials. When the material enters the plate hammer function area, high-speed impact plate hammer and broken, and thrown to the impact device above the rotor broken again, and then board the bomb on the back plate hammer area again broken from the back lining. This process is repeated until the material is broken to the desired size and is expelled from the lower part of the machine. The gap between the counter and the rotor can be adjusted to achieve the purpose of changing the particle size and material shape of the material.
