The factory made a 2-meter-long small conveyor belt, do not know what kind of motor and control? The motor starts to stop frequently, the minimum 1 second time, with a signal to control the conveyor belt to stop, and stop when the request to stop immediately, are not allowed to inertia. More
With a power failure brake motor,
This way to stop the brakes to achieve.
With the power of the brake motor can do "stop", but the frequent start of the motor is a test. If possible, add a clutch between the gear unit and the conveyor belt, and add an electromagnetic brake to the input shaft of the conveyor. When the clutch is closed (the electromagnetic brake is also released), the conveyor moves; when the clutch is disengaged (The electromagnetic brake is also tensioned) The conveyor belt stops. Use control of the clutch and brake to control the movement or stop of the conveyor belt. While the motor is in continuous operation. Another solution: If you need to use the transport distance as a conveyor belt based on the start, you can use pneumatic system to achieve their goals. Feed with cylinder (2 sec.) And return quickly (1 sec.). To avoid the problem of frequent start and stop the motor.
