The ice machine will stop in a few minutes
Reason two: check the ice switch is brokenSolution: using the power meter, look at the water retaining plate is closed when the ice full switch is not normally closed, if it is proved to be good, and replace the full ice switch, or view the ice on the opposite side of the magnet magnetic switch is
Reason three: high voltage switch openSolution: use the power meter to measure and see if the high voltage switch is normally closed under the stop. If yes, then change the high voltage switch, and also make the two of the switch on the computer board short
The daily use and maintenance of ice machine will have a few minutes when the machine has just started, or it has just started:One reason: the tap water is not opened, the heat is not good.Solution: check whether the water switch is switched on or not. The cooling port of the machine is blocked, and the air cooler has not cleaned the radiator for a long time. If so, clean the radiator (Note: cleaning the radiator can not be washed with hard objects, brush and polyester cleaning)
