I am an amateur repairman and have many household appliances,But the difficulties encountered, I received an ice machine, the ice machine has 6 minutes of refrigeration, but no ice began to heat up, in the online search for a long time have not found the reason, this is: Guangshen ice machine ice machine, Guangzhou City Electric factory model: SD60.Please enlighten people pointing outThanks again
Fourth: ice full stop:When the ice shedding process is complete, if the ice machine ice storage refrigerator has been filled with ice, were not dropped, the pressure in the ice machine ice skating board, which continued to open, can not be reset, after 30 seconds, the ice machine will automatically stop (stop lock time for 3 minutes), until take lots of ice skating. Plate after reset, and downtime is full 3 minutes to restart the work of ice making machine.
Third: ice removal:When the ice machine hot gas solenoid valve open, refrigerant hot air, heated ice mold, the ice sheets fall and fall into the ice machine storage refrigerator, ice slides down, open the skate board and quickly reset, ice machine ended off ice, ice began to program, over and over again.
Second: precooling ice making:Before the water ice making machine to start work, the first compressor power for 30 seconds, the evaporator (ice mold) is pre cooled, after 30 seconds after the pre cooling, water pump, water flow into the ice mold, through every ice was frozen, when reaching the set of ice thickness, ice machine ice thickness detector receives information, or ice for more than 45 minutes, automatically enter the ice shedding process of ice making machine, hot gas solenoid valve to work, water ice machine stops working, the heat flow through the evaporator heating, start off ice. But if the ice making time is less than 5 minutes, the ice maker will not start the ice removal program (that is, the ice lock time is minimum 5 minutes).
First: the refrigeration system starts:Open the ice maker power switch, the water inlet valve is energized, and the water inlet is started, and the water level can be automatically controlled. Ice machine hot air valve automatic balance system pressure, compressor first power, delay 30 seconds to start. Once the ice compressor is started, work is maintained during the whole process of ice making and ice removal. The condensing fan is controlled by condensing temperature, and the ice compressor is delayed 30 seconds after the start of the compressor. The water pump is started.
