The notebook disassemble, what good screwdriver
At this point, the notebook has been completely dismantled. What should notice is the classification of the screw, this machine has about 6 kinds of screws, the screw cent is good kind, when install, save trouble and effort!
At this time, you can see the motherboard and the fan, the fan screws removed, and then put on the motherboard that one in the upper right corner of the main board fixing screws removed, then the video data line, hard disk interface line and the high voltage line pulled out, can directly remove the motherboard. Note that when you take the motherboard, as far as possible first hand in the "zone" discharge, such as USB above the iron sheet, so as to avoid static electricity on the main board of the electronic components breakdown.
To remove the panels should pay attention to, should first connect the panel to the main board of the joint, carefully removed, there are key and signal lights and mouse skateboard joints. Then notice that the panel is stuck and can be broken with a bit of dark force.
1. first of all, unplug the notebook power, remove the battery, remove the drive screw, and drive the drive down.2. and then take the computer behind the screws are removed, you can remove the keyboard.3., when removing the keyboard, note that three clips stuck, and use the Xiaoping screwdriver to gently pry open, and then remove the keyboard, you can remove the panel.
