Home > categories > Home & Garden > Hanging Baskets > The problem of the front scaffold of the upper operating basket
Question:

The problem of the front scaffold of the upper operating basket

Is the basket a category of a lift or a high-altitude work vehicle? Is there any specification, standard description?

Answer:

32 platform surrounded by a guardrail to carry out high-altitude operation of the hanging device 33 Suspension mechanism through the wire rope hanging platform, erected in buildings or structures, can be used as a dynamic or powerless device 34 The device that allows the platform to run up and down 35 safety lock When the platform speed reaches the rope speed, can automatically lock the safety wire rope, so that the platform to stop the device 36 The maximum load on the platform is allowed to withstand the maximum of the sum of the quality of the personnel, tools, equipment and materials carried 37 Test partial load The load center of gravity is located at the end of the platform from the basket Of the test load 38 Standing Kids Use the basket as a permanent accessory for buildings or structures 39 The cradle is temporarily set up on a building or structure 310 Trolley Suspension The suspension is mounted on a basket of buildings or structures with tracks 311 Trolley-type basket hanging on the top of the abundance of people who are located directly on the building or structure of the basket 312 rated speed basket platform under the rated load, the specified speed 4 Classification 41 Type 411 According to the overall structure is divided into standing, very set 412 According to the suspension installation method is divided into rail, no track 413 is divided into climbing type, hoisting type according to the lifting type 414 by driving type is divided into manual, pneumatic, electric 415 According to the number of layers of the basket structure is divided into single, double and three 42 The main parameters and basic parameters The main parameters of the basket with the rated load that should be consistent with the provisions of Table 1
In addition, the front bracket of the suspension structure should not be supported on the non-load bearing structure such as the parapet wall and the edge of the building outside the eaves. The extension of the front beam of the suspension mechanism should be in accordance with the product specification; The front bracket should be perpendicular to the support surface, and the casters should not be force; the upper bracket should be fixed in the front bracket adjustment rod and cantilever beam connected to the node; idle rough pile Nao stumbling missing painting is strictly prohibited the use of damaged counterweight Or other substitutes; counterweight should be fixed and reliable, the weight should meet the design requirements. "Now Rieter"
There will be no problem, nor will the basket of the beam will not open the rough heap Nao staring short painting, because the back of the screw with the adjustment rod fixed, I often so loaded, no problem, a lot of site installation Basket, the front bracket is simply not installed. Can only do so. Upstairs that the horse is not recommended to use the horse in the domestic site, because the quality of the wall how you do not understand, but also the design unit strength report, but also stamped, few people are willing.

Share to: