The safe distance of the concrete mixer
Different devices have different requirements. But the principle is, as far as possible little, and can't always wall during operation. Therefore, maintenance convenience, give attention to two or morethings is good with 3 -- 5 mm, the thickness of the maintenance when the replacement is a flat screwdriver
The single machine switch box is in the concrete mixer. That distribution box is the switch box. If it's a complete set of stations, it's in the control system, which is where the computer operates. This distance is set by itself
1. The correct use of 1) to ensure the mixing quality of the mixture, it must be the gravel, sand and cement to be accurate. Before stirring, adjust the position of the pointer on the water tank indicator to control the amount of water. The mixing time should be strictly controlled, and the hopper discharge should be clean, otherwise it will affect the mix of the next mixture. 2) when loading in the feed hopper, should pay attention to the loading sequence, namely the rubble next, cement, sand, in the hopper rises so does not cause cement float in the sky. When the work is finished, pour some gravel or sand into the mixing drum, stirring up 10min. Otherwise, it will be difficult to clear after the rest of the drum solidifies.
