The speed range of the moving platform of the left and right movement of the screw and step motor
A, 500 mm/SEC. Because stepper motor speed decided to torque of stepping motor, step motor rotation speed is high, but the torque is too small, although big step motor torque is bigger, but the start torque and rotational speed is not high. Second, the linear stepper motor, linear motion back and forth mainly load, than the general rotary stepper motor by way of to transform the linear motion mechanism is 57 the screw motor will be more simple than institutions, reducing the volume.
This is a funny question. You don't know the spacing of the screw thread, the motor model doesn't know, the rotation speed doesn't know, you know what the range is?
500 mm/SEC. The scope of the stepper motor can be realized, because the stepping motor speed decided to torque of stepping motor, step motor rotation speed is high, but the torque is too small, although big step motor torque is bigger, but the start torque and rotational speed is not high. Example: the eagle fly stepper motor 57 stepper motor racing can reach 50 RPM, form a complete set of 10 mm pitch screw, step motor only 30 per turn, if the supporting 40 mm pitch screw, step motor speed fell sharply below 10 turns per second. Of course, the 86-step motor is a bit better, but the 86-step motor will not be much better, and the 86-step motor will not be able to speed up to 57. The other, bigger steps are not even 10 revolutions per second. (unless decelerating machine grows). If it's a belt drive, it will be much better.
