The transmission power, the round speed and the center distance, how to determine the pulley type?
It can be according to the speed and the power of the diameter, the other must have the condition coefficient, the belt length coefficient, the band coefficient. The formula in the manual is mentioned, and the formula is calculated by the formula. Will rotate speed and power plug in directly, Pd = KAP, KA coefficient for working conditions, according to Pd and speed zone type is determined, and then take number Z = Pd / [(P1 + delta (P1) * KaKL], P1 single root power rating V belt, delta P1 rated power increment, KA small pulley Angle correction coefficient, KL long correction coefficient, are available from the manual check.
Based on the speed ratio of your wheel, you can choose the right wheel diameter according to the power you need to transfer and the center distance. There are a number of factors to consider. The general manual will give you a selection method. Want to see.
This, must first determine the shape of the belt, triangle or cog belt or other belt form, and in combination with your load condition, is a continuous load or alternating load.
