The TV satellite receiver to decrypt the pot

Answer:

Three colin:13, Colin: (1) in the installation settings, power options, press the 5 "1" button. (2) in the "restore factory", press the 5 "1" button to restore all factory preset program.14, Colin, K2838, KL-3383R: search menu, go to the transponder settings, press the volume to reduce the key 4 times, and then press the mute button.15 Colin and Nops: menu extension menu OK system settings OK OK system 2 Vol mute.Four, Dezhou Kehai16, Dezhou Kehai 5088: system recovery: press the left key key, keys, keys, keys, keys to the left and then press the button two times.Five, Kehai17, 5088: 1 Kehai system settings, press the left button once, the key one, then press the left button once, press the button two times.18: "Kehai blind scan system set 2", please enter the password; press the volume key 4 times, press the mute button 1 times.Six, science and technology pioneer19 technology pioneer GL506: press the menu key, system settings, submenu, select system settings, confirm dialog box, system settings, and system settings 2". Enter these two systemsTo enter the password: that is: volume reduction, program number minus volume reduction, program number minus, program number minus, program number minus (can be referred to as: left, bottom, left, bottom, lower). Enter the password for system setup 1Blind scan, and all the 100.5oE programs.

Encyclopedia of various brands of satellite receiver pot decryption methodWith remote control for automatic search program, the system settings password is F1 11, F2 02, where F1, F2 for the remote control button.Menu - system settings to determine which of the six - digit code to determine the automatic search progress of 100% - OK 11 F2 02 F1 input. If not, it's OK to do it again.First, the emperor view1, Emperor view 2080: in the "transponder settings", press 5160, 1698, 156988.2, the emperor watching 2080A blaster (V:1.11); in the boot state, with remote control press the "menu" key to the TV screen, show the emperor's main menu, type "530478", TV screen display "system information", dataIn storage......" To show the disappearance of the "main menu" in the "automatic search", the internal TV program automatically restored to the factory settings. At this point, select the "automatic search", set the corresponding parameters can beBlind scan.3, the emperor as HSR-2080A: bring up the menu: enter the "transponder settings" one, directly with the remote control press "1698", "picture" appear "system update" words, and then in the main menu "program editing"The following column appears "automatic search", enter this column, according to the corresponding parameter settings, and then press "confirm" key can.4, the Emperor sees HSR-2080C: to move the cursor to "transponder settings". Use the remote key to enter "1698" or "5168".5, the emperor see 2080/C: menu: Emperor's main menu - transponder setting 5168 or 235523 can be.6, Emperor watch 2080 series settings method: open the main menu, directly enter "5168" can be restored.7, the emperor regards the free machine method password 530478.

Two, East official8, East official: (1) when the factory returned, press "1270"". (2) when you restore the factory, press the left key to the "favorite" button. (3) how to open the 9 screen of each edition: 5.13 Edition: right key > confirm key.5.60 Edition: Rename key, left key, confirm key. 5.89 Edition: right key, left key, rename key, confirmation key.9 、 East official 2000Q open blind scanning and 9 screen settings: according to menu, system settings, restore factory settings, confirm recovery (do not press confirmation), press volume right key, and then press confirm key to restore factory status, thisWhen the machine has returned to the factory status, the 9 screen features open: second times the menu, system settings, restore the factory settings, confirm the recovery (do not press the confirmation), press the favorite key, the machine once again recoverTo the factory status, the 9 screen and blind scan are open. Note: you can use the 9 screen to press the "0" button directly; "blind scan", please use menu > program setting - single star search 2.10, East official 2000Q: according to the menu [system settings] restore factory settings (first do not press confirmation) press the right volume button, and then press the favorite key, and then press the confirmation key to restore the factory status, then you can open the blind sweep function.11, east Shi 2000C, film dragon and full vision series. Setting method: menu, system settings, OK, restore factory settings, OK, confirm recovery, press FAV button, OK, you can recover blind scanning and preSet program.12, East official 2000F/C: bring up the main menu, enter the "system settings" one, click "restore factory settings", press "confirm", "drop-down menu", in the absence of prompt, press the remote control "Hi"Love key, and then press "confirm", return "program settings" one, you can enter the "single star search" column, according to the corresponding parameters set, and then press ok.

Ten, Beaming with Joy29, Beaming with Joy D8000: recovery of foreign television programs and blind scan menu in the menu by remote control button "08" password box, enter "2004", according to the "OK", then the menu will appear "This is blind scan.Eleven yum30, yum P-3900/E910 machine code: 1111.31, yum 2300 machine passwords and Yum dual: universal password: 9876.33, P3500 restore original settings: at the same time press the front panel OK and channel two keys, password for the first time: 0000.Twelve, E34, E911S: original password: 1234.Thirteen, Qian Cheng35, Qian 2100:1234.Fourteen, cp788...36, cp7882-7885 machine password: 0000.37, cp7882 hidden menu, manually modify the key code: menu + general interface: parent lock, red key to Huang Jian, enter PIN code, "0000", you can see V, I/B, N, S on the left, select one of themAfter you type the system, press OK to edit the key code on the right.

Seven, Tiancheng20, Tian Cheng (Tian Cheng 919, Xin Mai Wei series and 619, Dragon Prince, Tian Cheng game king, etc.): when increasing the program, the local frequency is set to "11111", and the down frequency is set to "22222"",The symbol rate is set to "33333". After confirmation and default again, the satellite blind scan function and preset program appear in the program menu.21, Tiancheng digital satellite receiver (China dragon) method to increase the blind scan: according to the information button on the remote control after 3 seconds, then press Menu > Settings "to" program.22, Chinese, Angel, Tiancheng Dragon King of the game, more music, the lion king, Everest, dafuhao, Xiangge Shangla home, a good year, Best (2005): according to the information button for 5 seconds, the screen.When the message disappears, the dialog box appears, "whether to restore the default settings", press the left and right keys to make "yes" to yellow, and the blind scan function can be resumed after confirmation.Eight, Tiancheng23, Tiancheng machine code: 1001.Nine, Kim Tae24, Kim Tae young child blind sweep and delete channel password: menu: enter password: 54321.25, Kim Tae Tae "good day", Gauss, Baer restore external password: 5678.26, Kim Tae D8000 (good day): bring up the main menu, enter the "default settings" one, select the default language for: Chinese, press the confirmation key. At this point, the picture prompt text: "enter the password."!"At this point, press the numeric key" 5678 "on the remote control. Then, in the submenu of" program settings "," network settings "and" Settings ", two columns, enter the" Settings "column, and then according to the corresponding parametersSet and press OK to confirm.27, Kim Tae Da bumper harvest D8000: menu - program setting - "54321" (or "082004") can be.28, Kim Tae TAE: menu direct input 54321 or 5678.