The whole wardrobe parts are using more thick sheet of it?
In addition to the back panel and the plywood, there are drawers, trellis racks, trouser shelves, wine cabinets, red wine shelves and so on. For drawers, lattice racks, trouser stands, and shelf supports for wine cabinets, it is appropriate to take 18mm thickness sheets into account in terms of gravity. The bottom part of a drawer, trellis, and trouser shelf. The bars in the frame are free from force, so the use of 9mm is enough. The shelf of wine bar shelf is decided according to the structure and span dimension of the wine cabinet. The span is big with 18mm, and the small 9mm is enough.How thick is it to make a custom-made wardrobe? From the above analysis, we can see that the thickness of the back panel of the wardrobe is 9mm, and the regular 18mm is enough to meet the requirements of most custom furniture, and this is also the thickness of the panel used for custom furniture.
The thickness of the cabinet plate is mainly 16mm, 18mm, 25mm and other thickness. The more commonly used are 16mm, 18mm, these two. In terms of gravity, there is little difference between 16mm and 18mm, but 16mm is mainly used in decoration and carpentry. At present, most of the businesses on the market are 18mm, is the main line equipment is almost set 18mm, so the production quality is relatively stable, the thickness is more suitable for large custom furniture, the key is the cost and 16mm. 25mm thick plate is applied to the panel, as if the plate and riser would is too bulky, although the bearing capacity is enhanced, but the cost will increase.
The 9mm backboard is another commonly used wardrobe for backplane thickness measurements. The use of 9mm backplane wardrobes are use slot type installation, the benefits of this is, back to wardrobe occupy little space, and the space between the back wall, let Xingning moisture better, also can be assembled and disassembled for many times, using multiple transfer. Moreover, the 9mm thickness of the back of the load-bearing capacity can support the top cabinet and the weight of each board, ensure the stability of the wardrobe.The 18mm backplane is better for 9mm and 5mm in terms of moisture resistance and stability, but the depth of the wardrobe will increase. This problem needs to be considered and the cost will increase. In addition to installing the hook type products in the wardrobe pattern, it is recommended to use 18mm thickness, other 9mm thickness backplane is enough to use.
Wardrobe backplane thickness mainly 5mm, 9mm, 18mm three, businesses are commonly used 5mm, 9mm backplane. The use of 5mm backplane custom wardrobe, you can increase the wardrobe depth, cost, price is low, so this is a lot of businesses and consumers choose 5mm thick sheet as a backplane reasons. But the 5mm backplane is too thin to slot, so the 5mm backplane is directly nailed to the wall and cannot be disassembled two times. 5mm wardrobe backplane in moisture resistance, and basically meet the use, but if encountered a long time of rainy season, will also be tested. The wardrobe is mainly bearing parts of riser and horizontal plate, backplane is mainly to increase stability. For stability, although the back stress is small, but if the wardrobe width span more than 2000mm, backplane will the corresponding force, if 5mm is prone to break back, with a long time will be warped crack problems.
