There is a feed and send system. Now due to the severity of the material is not the same as the two converters often change speed, the workers do not understand their own, often by, often bad now how to use the best way you can use a potentiometer or other method, control of the two frequency converter, synchronous operation. Is to adjust one, and the other also with the kind of frequency, so that you can let the workers themselves to open, and the two inverters, the same manufacturer, the same model, the same load,
The boss to the electronic parts store, a duplex potentiometer, resistance and frequency converter converter on you as well, so that the original line after the line on the inverter came up to double the potentiometer, ah, ah ah Wang simple to score
What kind of communication mode does the frequency converter support? Generally speaking, it is more accurate to communicate by means of synchronization. Expensive。The main transformer potentiometer, from the analog frequency converter, may be 1, the lag will be greater than 2, analog may have a larger error, 3, analog may be subject to interference. The cheapest。You can also use synchronous controller, analog input, the two roads as the same analog, cheaper, more reliable synchronization, may be disturbed.
Two start with frequency conversion. The frequency converter is controlled by a potentiometer, and the analog output signal (AO.GND) is sent into the converter and connected to the AI.GND port of the converter. If the pulse port can also be connected to the pulse port.
One can be controlled by a potentiometer, the other can track the first torque can be achieved, and general general frequency converter has this function
Two inverters with the same frequency and start signal, so that it can be synchronized; another way is to do in front of a given frequency inverter with potentiometer, given analog output signal of the first station to do second machines, it can be done simultaneously; but you have to say clearly what is what specific brand series in order to further clear the inverter parameters, otherwise only vague answers.
