Three-phase three-winding transformer high-pressure medium-pressure low pressure is what it means
Hello! Transformer high voltage, medium pressure, low voltage, respectively, refers to the three groups of winding (rated) voltage level. For example: 220kV voltage level of the transformer: the 220kV high voltage side, 110kV pressure side, 10kV low voltage side of the three groups of voltage levels of the composition. Depending on the needs of the manufacturer, manufacturers may also be required to produce windings for other voltage classes. Such as: by the 220kV high voltage side, 35kV in the pressure side, 10kV low voltage side of the three groups of voltage levels of the composition. 500kV voltage level of the transformer: generally by the 500kV high voltage side, 220kV medium voltage side, 35kV low voltage side of the three groups of the composition of the voltage level winding.
transformer:
Transformer is the use of electromagnetic induction principle to change the AC voltage of the device, the main components are primary coil, secondary coil and core (core). The main functions are: voltage conversion, current conversion, impedance conversion, isolation, voltage regulator (magnetic saturation transformer) and so on. According to the purpose can be divided into: power transformers and special transformers (electric furnace change, rectifier, frequency test transformer, voltage regulator, mine transformer, audio transformers, IF transformers, high-frequency transformers, impact transformers, instrument transformers, electronic transformers , Reactors, transformers, etc.). Circuit symbols commonly used as the beginning of the number. Example: T01, T201 and so on.
Three-phase three-winding transformer high voltage, medium pressure, low voltage that the three sets of winding (rated) voltage level.
Three windings have three windings per phase. When one winding is connected to AC power, the other two windings induce different potentials, which are used for loads of 2 different voltage levels. Power plants and substations are usually three different levels of voltage, so the three-winding transformer in the power system is widely used. Each phase of the high and low voltage winding are set on the same core column. In order to use a reasonable insulation, usually the high-voltage winding on the outermost layer, the pressure and low-voltage winding on the inner layer.