How tight to a tighten down the bolts on a '86 volvo 240 water pump. The manual I bought doesn't say. The torque won't help me cause I don't have a torque wrench, so just general discription would help a lot. (I stripped the threads on a stud last time)
the pump is held on with 6mm x 100 thread pitch nuts and bolts. the best tool to use will be a 1/4 inch drive ratchet and short extension with a 10 mm deep socket [6 point] these bolts are 12-15 ft bs. of torque if you snug bolts down evenly and use only moderate pressure as a final tighten you should be alright. after srarting all bolts let pump relax so the top seal is not crushed