I do not understand the hope that my friends guide the guidance teach me, the general is divided into 150 160 type 200 type 220 type 250 type (4 claw) a set of refers to the splicing claws +4 turn joints +1 turn Parts There is the corresponding model with the corresponding splicing? Or with the model has nothing to do with the folder of the glass? Such as 150 can be used to replace the type of 200 can not use? Who explained the next
The same series of models of the splicing jaws can only be equipped with the same series of models of the joints, and glass has nothing to do, and the glass aperture is determined by the joints.
The series of splicing claws is twice the distance between the center of the hole of the spliced joint and the center of the hole of the adapter. The distance between the center of the hole of the 250-piece claw fitting and the hole center of the adapter is 125mm, twice the 250mm, 250 series.
The concept of a set of pieces is not necessarily a claw 4 head, corner parts useful a claw a head, there are two jaws both head. (You can look at the point of the glass curtain wall, the streets can be seen everywhere, the corner is a claw or head of a head) as to what time is what model is to look at the curtain wall design force and then select the model calculation After the final model) specific to which manufacturers of materials is generally there are three possible (Party designated, the curtain wall company designated, design specified).
Stainless steel splicing jaws by: the number of joints (the number of paw), a split jaws, a switch composed of three parts, such as a set of four claws from the four + 1 + 1 adapter.
