to which wire in the back of my car radio do i hook my remote wire to from my amplifier?
I also have a 2006 Toyota Corolla CE with an computerized transmission. If I force it somewhat confusing the worst gas mileage i'm getting is 32 mpg. the utmost i are becoming so a ways became 40mpg in a mixture of 75% city/25% highway making use of. To get that 40mpg i became hypermiling without doing something unlawful or fairly risky (like drafting semi automobiles). On customary although my gas mileage is usually 36mpg. The hypermiling I did... No velocity above fifty 5 mph. Manually cycle the A/C. flow away it off until i could no longer take it anymore then turn it decrease back on for 5 - 10 min. Coast right down to purple lights to make a green. Racing to a purple easy (as many drivers do) is pointless and wastes gas. No rapid acceleration. Coast right down to end signs and indications attempting to time it so i'm next. If no longer a minimum of i did no longer could wait diverse turns to be first in my lane. With wintry climate drawing close i'm going to attempt yet another around of hypermiling and notice if i can get extra advantageous than 40mpg. :)
Most factory radios, your Corolla included do not have a dedicated remote wire. Some will have a power antenna wire that can sometimes be used but the Corolla doesn't have a power antenna. You want to connect the amp remote to a switched 12V + source. The appropriate wire on your factory radio is the gray wire. That way, the amp will turn on whenever you turn on the ignition. Alternatively, you can connect the remote directly to any switched 12V wire.
