toyota prius 2002 inverter water pump where is located and how to replace and buy
The manual pages JerryJ is referencing are HV-24 through HV-28. Essentially, you drain the coolant, remove the front bumper cover and the left head light assembly to expose the pump. It is held by two bolts and has one connector and two hoses. After replacement the coolant is refilled and the system must be burped. Those two nipples at the front of the inverter have to be used, but I haven't had success piping them back to the reservoir as the manual describes. I gravity feed them into a clean jar on the floor and recycle the fluid manually. When it is done you should see strong flow in the reservoir as you look in the top with the ignition on but not ready. The level usually drops after driving around the block - top it up and enjoy.
