Tractors plough the soil with water
Use the method of moisture. When it is used for ploughing. Take moisture on both sides of the plot. In order to reduce the drain, the last one will be lowered. If the method of using the other method or other method of ploughing is adopted, the method of using the method of replanting 1 plough can be used to make rough and close water. That is, on the left of the valley of the ditch, the plough will be ploughed and one plough will be ploughed, turning the great ditch into a small trench with two wide ploughs. If you have a moisture trap, you should adjust the level of the ground water to the position of the moisture.
Plough the soil again. First, the plough should be plowed well before ploughing, and then the plough will be deep. Returning from the end of the ground, the plough will be replowed in the original place, and the plough will be transferred to the normal ploughing, and will continue to work with the inside. Using this method, crop residues and weeds are shown to be less, but the ridge is slightly higher.
KaiShang method In order to open a good quantity, can be made in turnrow KaiShang place 1, benchmarking in a tractor appropriate location to find 1 goal (e.g., to aim at the tank cover), KaiShang should adjust locomotive, people want to sit is, with his eyes goals, on a motorcycle of benchmarking at field in a straight line, along a straight line, can offer quantity of straight groove. 1. Double KaiShang. First, it will be used for the first time, and then it will be ploughed by the center of the plot, and then it will be reploughed by the inside turn, which will fill the middle of the gap. Then huasheng transferred back to normal before tillage depth, continue to ploughing up with varus method, using this method the ground flat land, not born stubble piece, but crop residues and weeds at KaiShang show more.
