okay so i recently brought a trumpet and the valve keys were getting stuck. i used the valve oil and it worked. but then when i put the valve key back in and tried blowing through no sound came out. i think it's because i didnt put it back in right. now my question is how do i put it in right? i tried everything but it's still not making a sound. thanks,
Unscrew the the valve cap on the appropriate under the button. attempt to softly pull the valve out. you may would desire to artwork it back and forth till it loosens up you may upload some oil around the the sting of the valve cylinder. as quickly as you have all 3 valves out sparkling each of the particles off of the valve, you ought to use an sos pad to get dissimilar the heaver stuff off. Wipe each factor off with slightly of lighter fluid and a sparkling rag. sparkling the valve bores including your snake. Stuff a rag down each hollow to get the stuff the snake loosened up. Reoil the valves and the cylinders and reassemble.
The first thing you should check is the order of the valves. take them all out and look on the sides of them for a number. One should have a 1 on it, another will have a 3 and the other one will probably be unmarked but that's obviously the one in the middle. On the outside of your trumpet there will be a 1 and a 3. The valve with the 1 on it goes in the slot that has a 1 on the outside, etc. Make sure you put these in right. if it's still not playing after you put the valves in and they're secured, twist the tops of the valves where the pearls are clockwise until they don't turn anymore. This should fix your problem.
