Types of ceramic composite pipes
Spot welding cassetteThe point welded and wearable ceramic pipe is made of high temperature resistant strong viscose adhesive, and the ceramic sheet with the middle hole is adhered to the inner wall of the pipe. At the same time, the ceramic is firmly welded on the inner wall of the pipe through the hole welding process. To protect the solder joint, the ceramic cap is then screwed on. Each tile not only mutual pressure and mutual inserted, each porcelain forming a trapezoidal angle, which is closely connected between the ceramic blocks without gap; when a final lap of a compact embedded, mechanical self-locking force of 360 degrees is formed between blocks (porcelain this technique in a few centuries ago, it was used in China bridge construction engineering). Rivet connection, metal penetrated with magnetic drill or drill, then the rivet and the mutual pressure wear-resistant ceramic plates with holes and metal connection, the production process is relatively complex, long production cycle, high cost.
Wearable ceramic pipeThe wearable ceramic pipe is adhered to the inner wall of the pipe by high temperature and strong viscose. After the heating and solidification, a strong anti abrasion layer is formed. The manufacturing process is simple and the cost is higher,. The use of temperature generally can not exceed 100 degrees, is not suitable for pipelines
Centrifugal casting of composite ceramic pipesThe centrifugal casting composite pipe is a composite pipe made of self combustion, high temperature synthesis and high speed centrifugal technology. A uniform, dense and smooth ceramic layer and transition layer are formed at high temperature and high speed. In addition, the work temperature is 850~900 degrees, ceramic will not fall, lighter weight, composite ceramics to hardness, anti - grinding, to solve the past to the thickness of anti - grinding. Straight pipes, elbows, elbows, three links, etc., in the wear and tear industry, the use of very good results.
