Types of personal protective equipment

Answer:

(6) seat belts Seat belt is to prevent the high operation of the fall of the protective equipment, the use of attention to the following matters: 1) Work on belts above 2 m above the belt must be a seat belt. 2) should be used in the belt at the waist, hook to buckle at a level not less than the level of the operator's reliable place, can not buckle in the operator's position below to prevent the impact of increased impact when falling, people injured The 3) to always check the seat belt and part of the hook, found that broken or wear, to repair or replace. If the protective cover is lost, add it after use. (7) anti-acid and alkali supplies Anti-acid and alkali supplies is to protect workers in the production environment from the acid-base hazards of individual protective equipment. According to the protection of raw materials can be divided into: rubber anti-acid and alkali supplies, plastic anti-acid and alkali supplies and wool, silk, synthetic fiber fabric anti-acid products and other categories; according to the protection of the site can be divided into; anti-acid work clothes, gloves, boots , Anti-acid masks and masks and other categories.

(5) masks and goggles 1) Radiation mask is mainly used for welding operations, to prevent the welding in the strong light, ultraviolet and metal flies damage the face, gas mask should pay attention to the performance of the filter material. 2) anti-hit goggles can prevent metal, sand, steel and other spatter on the eye damage, used for machine operation, casting ramming mouth and other types of work. Radiation protection goggles can prevent harmful infrared, dazzling visible light and ultraviolet rays on the eye damage, mainly for smelting, casting, burning and casting heat treatment and other types of work. This goggles are mostly connected with the brim, fixed, and can also flip up and down.

(3) protective shoes 1) rubber shoes have insulation protection, mainly for electricity, hydraulic sand, open operations and other jobs. 2) shoes are insulated, anti-skid protection, mainly for maintenance, crane drivers, electrical and other types of work. 3) ladle shoes for casting, steel and other types of work. (4) helmets 1) The inner cushion of the cushion is to be strong, and the distance between the head and the top of the cap can not be less than 32 mm. 2) can not use the helmet when the cushion to prevent deformation, reduce the protective effect. 3) found that the hat has cracked, concave and wear, etc., to immediately replace.

(2) protective gloves 1) thick canvas gloves and more for high temperature, heavy physical labor, such as steel, casting and other types of work. 2) thin canvas, yarn, finger gloves are mainly used for maintenance workers, crane drivers and distributors and other types of work. 3) turn fur leather gloves are mainly used for welding jobs. 4) rubber or rubber gloves are mainly used for electrical, casting and other types of work. Wear a variety of gloves, be careful not to let the wrist exposed to prevent welding in the operation of Mars or other harmful materials splashed into the film caused by injury; the operation of various types of machine tools or in the place where there is danger of being squeezed when the gloves are strictly prohibited.

(1) protective clothing 1) white canvas protective clothing can make the body from high temperature baking, and resistant to burning characteristics, mainly for smelting, casting and welding and other types of work. 2) labor cloth protective clothing on the human body from the general shielding effect, mainly for non-high temperature, heavy physical operation of the types of work, such as maintenance, lifting and electrical and other types of work. 3) polyester card cloth protective clothing on the human body from the general shielding effect, mainly for logistics and functional personnel and other positions.