Unit hydraulic prop fittings 3 valve are used for general purpose
The higher the pillar, the lower the pressure. The same three-valve valve can be used on different specifications by adjusting different pressure values. In other words, if you want to use the valve general, you have to adjust the pressure. Otherwise, the pillars will be broken and even dangerous.
The three valves are the same type, but not general. Depending on the height of the struts, the maximum pressure values adjusted for the three valves are different. The pillars below 2.0 meters require approximately 38.2 zpa, 2.5 meters in about 32zpa
The three valves are the same type, but not general. Depending on the height of the struts, the maximum pressure values adjusted for the three valves are different. The pillars below 2.0 meters require approximately 38.2 zpa, 2.5 meters in about 32zpa. The higher the pillar, the lower the pressure. The same three-valve valve can be used on different specifications by adjusting different pressure values. In other words, if you want to use the valve general, you have to adjust the pressure. Otherwise, the pillars will be broken and even dangerous.
