Use an electric drill or hammer installed TV rack?
An electric rotary hammer drill with a safety clutch with a pneumatic hammer mechanism. Hammer is the use of compressed gas piston, impact drill bit, need not make much effort, can open 6--100mm in concrete, brick, stone and other hard materials on the hole hammer in the above-mentioned materials on the opening of high efficiency, but it is not a hole in the metal.
The TV mounts are all equipped with impact drills which can use 12 impact drills and M8 expansion bolts. Suitable for drilling in cement material hammer, impact drill for existing buildings in non cement material on the wall of borehole.
Percussive drills work by rotating and impacting. A single shock is very slight, but a shock frequency of more than 40000 minutes per minute can produce continuous force. Used of natural stones or concrete. When the impact drill works, the drill chuck is provided with an adjusting knob, which can be adjusted in two ways: an ordinary hand drill and an impact drill. But the impact of drilling is the use of internal gear to achieve mutual beat of impact, but the impact is far less than the hammer. It is not suitable for drilling reinforced concrete.
Wall drilling in modern buildings is more suitable for use with percussive drills, so installation of impact drills is recommended when installing a television rack. Suitable for drilling hammer in cement material.
