Want to play a few holes in the tile installed on the towel rack, with what play is better?
With only the rotation function of the ordinary electric drill, with axial movement of shock impact drill can rely entirely on manual tools, can also, ancient jewelry, crafts on the hole is not so open out, not to "escape", to experience the film and television works.Usually, the cement nail (a medium carbon steel material is adopted first, and then the hardness is increased by heat treatment, and the nail gun is hit, and the hammer is not knocked into the bricks and concrete). The glazed surface of the ceramic tile is arranged at the part of the predetermined opening.
Notice of operation of electric torch:1. Check the power cord before use. If you have, you must wrap up the insulating tape, do not be immersed in the use of water and random drag and tread, and can not touch the heat source and corrosive medium.2, the metal shell of the flashlight must be taken to protect the ground (zero) measures.3. Before use, make sure the torch switch is in turn off, and when the plug is plugged into the power socket, the hand drill suddenly turns.4, electric drill before use should be idle 0.5 ~ 1min, check the drive part is flexible, whether or not abnormal noise, screw, whether loose, the commutator spark is normal.5, drilling, both hands firmly grasp the electric drill, as far as possible not a single hand operation, should grasp the correct operation posture.6, can not use the chipped drill, drill down pressure not too big, to prevent the drill bit interruption.7, cleaning knife head, scrap, change knife first, these actions must be disconnected from the power supply.8, the small workpiece must be clamped with a fixture, and then use a flashlight drill.
It's OK to use a household flashlight.The utility model relates to a hand drill, which is a small drilling tool convenient for carrying, comprising a small motor, a control switch, a drill chuck and a drill bit. The minimum power, the scope is limited to the use and when the electric screwdriver with wooden drill, drill part can change according to the use of special tools, more applications and models.
During operation, the strength of drilling can not be too large, in case the drill or wire attack flies out.10, before operation, carefully check whether the drill has cracks or damage, if found in this case, then immediately change.
