Wardrobe installed, sliding doors, drawers are blocked, pull out, what is the reason?
Suggestion: after the cabinet design time to know the size of the sliding door. Also, such as your cabinets finished do sliding door to measure, it's you. Can measure the size of the door lai. This problem can be completely avoided. (20mm middle leaf increased on both sides of narrow 20mm can open the door. Besides, both sides of the door press down the sides of the middle door.
Solution 1: change the drawer, the drawer width narrowed, in the right side of the cabinet plate plus 18 slats.Solution 2: change the door. Cut the two doors on each side by 20mm, and the width of a door in the middle increases by 40mm.
First of all, the door frame width is 50mm, between the two door 50mm overlap also need this will increase the width of the door leaf. Such as the choice of the door frame is 40mm. That absolutely can open the drawer. I figured, from the right side to the left side of the drawer cabinet body board is 1514 of the distance, while the two door on the same track to the right side by side push past to open the drawer, but the two door side by side to the total width of the right is 1510mm (excluding bar). So it's only 4mm away from the drawer, and there's a slight error that won't open.
