Washing machine impeller does not turn, the following belt to impeller, hand break, both hands can not move
(2) the triangle belt is slipping or falling off. As long as the appropriate motor and clutch in the distance and the triangle belt rubbing colophong powder can solve the friction. If the triangle belt is aging and deformed, replace the triangle belt. (3) clutch deceleration mechanism parts wear or damage, usually to replace the clutch master line. (3) the impeller is jammed by foreign object. Would you please give me feedback when you have any questions after checking?
The fault occurs mostly on the mechanical transmission part between the motor and the impeller, and the concrete cause and the treatment method are as follows: (1) the fastening screw of the motor pulley and the clutch pulley is loose, and the sliding wire or the fracture is broken. As long as the re tighten or replace the fastening screws; if the impeller is to replace the square hole round impeller.
Stuck, remove the belt, and then turn the impeller back and forth, to confirm that there is no washing machine inside something holding, or else the rotating bearing is broken, change one.
