Water dispenser cleaning and cleaning of drinking fountains clean, how effective?
Five, use 7 - 8 liters of water to wash the whole cavity of the drinking water machine continuously, open all the switches and clean the liquid. Some people use only 1 litres of water to wash them. It is far from enough. They keep the disinfectant in the water dispenser.Six, with alcohol cotton swab at the back of the wall, when the water with the cup, it is easy to touch the water cooler switch at the back wall, not only scrub.After the disinfection of drinking fountains, there may be traces of disinfectant residue, can not immediately drink. Should first put a glass of water, smell, there is no chlorine smell. If you have, it should be discharged, until the smell of chlorine smell, you can rest assured.
Two, use forceps to clamp the alcohol and cotton, and carefully clean the inner liner of the water dispenser. The lining of the water dispenser is easy to accumulate bacteria because of direct contact with air. Scrub with alcohol to remove the dirt and prepare for the next step of disinfection.Three, dissolve 300 ml disinfectant into 2 liters or so water, then fill the whole water pump inner container and leave it for 10 to 15 minutes.
Specifically, the water dispenser disinfection should be divided into the following steps:A, unplug the power plug, remove the bucket, open the fountain behind the sewage pipe net, row of water, because the residual water outfall where water is the key cause two pollution of drinking water machine. Then turn on all the water switches and drain off the water.
