What about the air-conditioner filter and the non-washing?
Ways to clean air conditioning: First, turn off the air conditioning. This is a very important thing, and the appliance must pay attention to safety. Unpack the front panel of the air conditioner, just dig it out and lift it up, and you'll see two filters. Remove the filter, tap water from the tap water, don't use the detergent type, just flush. Keep it in the shade, not in the sun. The filter is usually plastic and can't withstand high temperatures. Pack the cleaned filter into the air conditioner and clean the air conditioner in advance if there is a dirty spot inside. This way, air conditioning can be used again to be clean and clean
If the air-conditioner filter is not clean, it will affect the heat transfer effect. Theoretically, the current will not increase at run time, but the cooling effect will be reduced
Filter is on the air inlet, if the filter is dirty, the wind into less, so indoor air circulation is slow, the outlet of the air volume is small, the machine evaporator because cold quantity scattered not to go out, pressure is more and more high, lead to machine outside the heat radiator is more and more big, the pressure rising, the greater the impact on the compressor compressor, the current has increased continuously, so not to clean screen pack refrigerating capacity must be decreased, so that the refrigeration effect is bad, power consumption has increased. Such as the original boot it takes 20 minutes to reach the set temperature, but now I need to boot 40 minutes to reach the effect, only on the power consumption is increasing a lot of, probably is this meaning.
After cleaning, the power consumption can be reduced by 15% to 30%, and the power consumption will increase by about 20%. It also pollutes the indoor air. The filter on the air conditioner commonly used words, within the air conditioning will gather a lot of dust and bacteria, the ventilation is more to the health of human body, so to clean frequently.
