What about the water vapour in the big car lamp?
Car headlights in water vapour should first to check whether the sealing parts of lamps and lanterns is good after-sales service branch, try to open the high beam thirty minutes after confirm good, this is ok. The cause of the water vapour of a car: Sun or up will make the headlight of internal air temperature, the water molecules in the air in the car wash or rainy days (especially when washing the car), all of a sudden encounter with the cold air outside in the transparent lens surface after condenses into water, so easily mistaken for headlamps is leaking. In addition, the headlamps are not fully sealed, and the design of ventilation tubes is designed to balance the internal and external pressure of the lamp. Therefore, the phenomenon of water vapour on the surface of a large lamp is natural, and the water vapor will naturally disappear with the use of time.
Because of the bad seal of the big lamp; Repair itself; It can be heated slowly, but not completely repaired; 2, open the sealant and clean it thoroughly, then wrap it up again. If it is a newly installed or newly purchased vehicle, it should be the quality of the process. Suggest to find a distributor or the maintenance department solve.
Because there is a gap in the lampshade, moisture in the air and water in condensation. You should be able to get a piece of cloth in the evening light
The way to save money: only remove the big lamp and open the back cover with a hair dryer, and then apply some sealant to cover it. And see if the rubber ring of the bulb is good. Of course, new lamps can be replaced.
